Water and sewer

Your city’s water meter can’t tell air from water.

So most properties pay for air on their water bill. Literally.

I can bring a patented water valve to your site that stops that charge. Customers average about 20% off their water and sewer charges. Rent it for nothing up front with no payments for 90 days. Or you can buy it outright.

Get your water numbers Free analysis · No obligation · 90-day money-back guarantee
How it works

You stop paying for air.

City water carries dissolved air. As water flows through your meter, its pressure naturally drops, so that air expands and the meter counts it as water. You pay for it, and for the sewer charge that’s based on it.

The patented valve goes in just past your meter and holds the pressure steady, so the air stays compressed and isn’t counted as water.

After install, your water flow is monitored for a few days, then the valve is fine-tuned to your building to optimize usage and savings.

It needs no power, has no parts to replace, and carries a 10-year manufacturer’s warranty. Nothing changes in how you run your property.

If you spend more than $2,500 a month on water, we should talk.

The proof

The real impact of this technology at other properties.

~20%
average savings, and up to 35%
30,000+
installations
10-year
manufacturer’s warranty, with a useful life of 20 to 25 years
$0
up front, if you rent

Certified to NSF/ANSI 61 and 372 for drinking water. Made in the USA. Savings apply to water and to sewer charges billed on water use.

Hotel · Ottawa, ON
19.5%less water
$28,149 saved in 5 months
Five months after install compared with the five months before.
Hotel · West Palm Beach, FL
17.8%less water
About $10,700 a year
Three months after install compared with the three months before, annualized.
Hotel · Toronto, ON
15%less water
$12,369 saved in 4 months
Four months after install compared with the four months before.
Apartments · Katy, TX
19.7%less water
About $3,850 a month
300+ unit complex. A full year compared with the year before.
Residential tower · Honolulu, HI
13%less water
About $1,350 a month
Ten months after install compared with the 15 months before.
Hospital · Texas
28%less water
About $163,000 a year
260-bed tower. Based on 8+ months of results, annualized.
Medical center · Nashville, TN
23%less water
About 550,000 gallons a month
Four summer months compared with the same months a year earlier.
Food manufacturer · Miami, FL
33.5%less water
A full year, measured
The year after install compared with the year before.
Car wash · Weston, FL
28.4%less water
About 23 cents less per car
Water per car washed, three months after install compared with the year before.

From manufacturer-published case studies. Results vary by property, which is why I run your own numbers before you decide anything.

90day
guarantee

Nothing up front and no payments for 90 days if you rent.

If you don’t save at least 15% in the first 90 days after install, you can have the valve removed and you owe nothing.

What happens next

From your bills to your savings.

1

You send your bills. I review them the way a CFO would and tell you if it’s worth a closer look.

2

If it is, I arrange a free site survey by a certified technician.

3

I bring you the numbers both ways: monthly rental and cash purchase.

4

Licensed plumbers install it in a few hours. Valve optimization takes place over the following days.

5

I check your next bills against your old ones. If you don’t save at least 15%, you owe nothing.

Rent it

No capital request, nothing to take to ownership. Nothing up front, and no payments for the first 90 days.

Buy it

Pay up front, own it outright, and keep all of the savings.

Is it a fit?

It works best at properties that use a lot of water.

Not sure? Send the bills anyway. If the numbers don’t work, I’ll tell you straight.

Questions

What people usually ask.

Will it disrupt operations?

Install takes a few hours. Before install, the technician plans whether the water needs to be shut off and for how long, so the work can be scheduled around your property.

What if it doesn’t save enough?

If you don’t save at least 15% in the first 90 days after install, you can have the valve removed and you owe nothing. If you chose the rental, you can pull it out with nothing out of pocket.

Who owns it if I rent?

The rental provider owns the equipment and you use it. You can pay off the rest of the rental early, or buy it outright from the start and keep all of the savings.

Is it safe for drinking water?

Yes. It’s certified to NSF/ANSI 61 and 372, the standards for drinking-water parts and lead-free materials, and it’s made in the USA. It goes in after your backflow preventer, installed by a licensed plumber.

Does it touch the city’s meter?

No. The valve goes on your side, after the meter and the backflow preventer. The utility’s meter and seals are never touched, and the bill is still read from the city’s own meter.

What does it do to our water pressure?

It steadies the pressure coming in from the city and evens out the spikes and surges that cause water hammer and wear on pipes and equipment. Many buildings get more pressure from the utility than their fixtures need, and the valve is set and then fine-tuned for your building so the pressure at the tap stays where it should be. The site survey checks your pressure first, and if it isn’t a fit, I’ll tell you.

How will I know it’s working?

Your water flow is monitored after install, and I compare your next bills with your bills from before install, based on usage charges only, not fixed fees.

What do you need from me to get started?

Your last 12 months of water and sewer bills, how many water meters you have, and the pipe size at each one. A photo of each meter helps if it’s easy. That’s enough for me to tell you if it’s worth a closer look.

Does it need maintenance?

No. It needs no power and has no filters or parts to replace. The only moving part is a spring, and it carries a 10-year manufacturer’s warranty.

Who’s behind OpExTech

A finance person, on your side of the table.

I’m Matt Boyer, founder of OpExTech. I was a CFO for 16 years, so I look at this the way you do: cost, return, payback, cash flow. I started OpExTech to bring properties cost-cutting technology that pays for itself, vetted through an established network of partners.

Finance first, technology second. If the numbers don’t work, I won’t bring it to you.
Find out what you could save — free

Get your water numbers.

Tell me about your property and I’ll run the numbers both ways, rented and bought, based on your actual usage. No cost, no obligation, no sales call. A ballpark is fine to start.

Under about $2,500 a month, water savings usually don’t pencil out. I’m still happy to look, and your other bills may be a better place to start.
Already have your bills handy? Email them straight to matt@opextech.io.
No spam. No sales call unless you ask for one.

Water not your big bill? See the other bills I look at.

In partnership with
PSI Network Inc. On Track Technology Solutions (OTTS) Flow Dynamics AppDirect